Choose one of the parts listed below.
NAPA Welding (WLD)
7771000
Wire Brush
Type:Small cleaning scratch brush (Brass),Length:7 7/8",Bristle Material:Brass,Bristle Area:3/8" x 1 1/4",Bristle Rows:2 x 9,Bristle Trim:1/2",Handle Length:7 7/8",Handle Type:Wood
|
|
7771001
Wire Brush
Type:Small cleaning scratch brush (Brass),Length:8 9/16",Bristle Material:Brass,Bristle Area:7/16" x 2 1/2",Bristle Rows:2 x 9,Bristle Trim:9/16",Handle Length:8 9/16",Handle Type:Wood
|
|
7771002
Wire Wheel / Grinder
Diameter:1 1/2",Maximum RPM:4500 RPM,Wire Gauge:.014",Wire Material:High Carbon Steel,Wire Wheel Style:Crimped
|
|
7771003
Wire Wheel / Grinder
Diameter:2",Maximum RPM:4500 RPM,Wire Gauge:.014",Wire Material:High Carbon Steel,Wire Wheel Style:Crimped
|
|
7771004
Wire Wheel / Grinder
Diameter:3",Maximum RPM:4500 RPM,Wire Gauge:.014",Wire Material:High Carbon Steel,Wire Wheel Style:Crimped
|
|
7771005
Wire Wheel / Grinder
Diameter:3",Maximum RPM:4500 RPM,Wire Gauge:.008",Wire Material:High Carbon Steel,Wire Wheel Style:Crimped
|
|
7771006
Wire End Brush
Type:End Brush,Bristle Material:Crimped Bristles,Shank Diameter:1/4" Shank,Application:Carbon Removal, Paint Removal, Plastic & Rubber Flash Removal, Weld Cleaning,Bristle Area:3/4",Bristle Gauge:.020",Bristle Trim:1",Case Material:Crimped Steel,Face Diameter.:3/4",Speed:20,000 RPM
|
|
7771007
Wire End Brush
Type:End Brush,Bristle Material:Knotted Bristles,Shank Diameter:1/4" Shank,Application:Carbon Removal, Paint Removal, Plastic & Rubber Flash Removal, Weld Cleaning,Bristle Area:3/4",Bristle Gauge:.020",Bristle Trim:1",Case Material:Crimped Steel,Face Diameter.:3/4",Speed:20,000 RPM
|
|
7771008
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Bristle Gauge:.014",Bristle Material:Crimped Steel.,Case Material:Steel,Face Width:1-1/2",Shank Diameter:1/4",Speed:5,000 RPM,Type:Cup Brush
|
|
7771009
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Bristle Gauge:.014",Bristle Material:Crimped Steel.,Case Material:Steel,Face Width:2-1/2",Shank Diameter:1/4",Speed:5,000 RPM,Type:Cup Brush
|
|
7771010
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Bristle Gauge:.008",Bristle Material:Crimped Steel.,Case Material:Steel,Face Width:2-1/2",Shank Diameter:1/4",Speed:5,000 RPM,Type:Cup Brush
|
|
7771011
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Arbor Size:5/8",Bristle Gauge:.014",Bristle Material:Crimped Steel.,Case Material:Steel,Face Width:3",Speed:14,000 RPM,Type:Cup Brush
|
|
7771012
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Arbor Size:5/8",Bristle Gauge:.014",Bristle Material:Knotted Steel,Case Material:Steel,Face Width:3",Speed:14,000 RPM,Type:Cup Brush
|
|
7771013
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC,Diameter:4",Maximum RPM:20,000 RPM,Wire Gauge:.020",Wire Material:High Carbon Steel,Wire Wheel Style:Knotted
|
|
7771014
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC,Diameter:6 1/2",Maximum RPM:9,000 RPM,Wire Gauge:.020",Wire Material:High Carbon Steel,Wire Wheel Style:Knotted
|
|
7771015
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC,Diameter:4",Maximum RPM:20,000 RPM,Wire Gauge:.020",Wire Material:High Carbon Steel,Wire Wheel Style:Knotted
|
|
7771016
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Arbor Size:5/8",Bristle Gauge:.020",Bristle Material:Crimped Steel.,Case Material:Steel,Face Width:3",Speed:8,000 RPM,Type:Cup Brush
|
|
7771017
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Arbor Size:5/8",Bristle Gauge:.020",Bristle Material:Knotted Steel,Case Material:Steel,Face Width:4",Speed:8,000 RPM,Type:Cup Brush
|
|
7771018
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Arbor Size:5/8",Bristle Gauge:.020",Bristle Material:Knotted Steel,Case Material:Steel,Face Width:6",Speed:6,600 RPM,Type:Cup Brush
|
|
7771019
Wire End Brush
Type:End Brush,Bristle Material:Crimped Bristles,Shank Diameter:1/4" Shank,Application:Carbon Removal, Paint Removal, Plastic & Rubber Flash Removal, Weld Cleaning,Bristle Area:1",Bristle Gauge:.020",Bristle Trim:1",Case Material:Crimped Steel,Face Diameter.:1",Speed:20,000 RPM
|
|
7771020
Wire End Brush
Type:End Brush,Bristle Material:Knotted Bristles,Shank Diameter:1/4" Shank,Application:Carbon Removal, Paint Removal, Plastic & Rubber Flash Removal, Weld Cleaning,Bristle Area:1 1/8",Bristle Gauge:.020",Bristle Trim:1",Case Material:Crimped Steel,Face Diameter.:1 1/8",Speed:20,000 RPM
|
|
7771021
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC,Diameter:6",Maximum RPM:9,000 RPM,Wire Gauge:.025",Wire Material:High Carbon Steel,Wire Wheel Style:Knotted
|
|
7771022
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC,Diameter:6",Maximum RPM:9,000 RPM,Wire Gauge:.020",Wire Material:High Carbon Steel,Wire Wheel Style:Knotted
|
|
7771023
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC,Diameter:6",Maximum RPM:6,000 RPM,Wire Gauge:.014",Wire Material:High Carbon Steel,Wire Wheel Style:Crimped
|
|
7771024
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC,Diameter:6",Maximum RPM:6,000 RPM,Wire Gauge:.014",Wire Material:High Carbon Steel,Wire Wheel Style:Crimped
|
|
7771025
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC,Diameter:8",Maximum RPM:6,000 RPM,Wire Gauge:.014",Wire Material:Stainless Steel,Wire Wheel Style:Crimped
|
|
7771026
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC to M 1.25 Adapter,Wire Gauge:5/8" x 11NC to M 1.25 Adapter
|
|
7771027
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC to M 1.50 Adapter,Wire Gauge:5/8" x 11NC to M 1.50 Adapter
|
|
7771028
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Arbor Size:5/8",Bristle Gauge:.014",Bristle Material:Knotted Steel,Case Material:Steel,Face Width:3",Speed:14,000 RPM,Type:Cup Brush
|
|
7771029
Wire Wheel / Grinder
Arbor Thread Size:5/8" x 11NC,Diameter:4",Maximum RPM:20,000 RPM,Wire Gauge:.020",Wire Material:Stainless Steel,Wire Wheel Style:Knotted
|
|
7771030
Wire End Brush
Type:End Brush,Bristle Material:Crimped Bristles,Shank Diameter:1/4" Shank,Application:Carbon Removal, Paint Removal, Plastic & Rubber Flash Removal, Weld Cleaning,Bristle Area:1",Bristle Gauge:.020",Bristle Trim:1",Case Material:Crimped Steel,Face Diameter.:1",Speed:20,000 RPM
|
|
7771031
Wire End Brush
Type:End Brush,Bristle Material:Knotted Bristles,Shank Diameter:1/4" Shank,Application:Carbon Removal, Paint Removal, Plastic & Rubber Flash Removal, Weld Cleaning,Bristle Area:1 1/8",Bristle Gauge:.020",Bristle Trim:1",Case Material:Crimped Steel,Face Diameter.:1 1/8",Speed:20,000 RPM
|
|
7771032
Wire End Brush
Type:End Brush,Bristle Material:Crimped Bristles,Shank Diameter:1/4" Shank,Application:Carbon Removal, Paint Removal, Plastic & Rubber Flash Removal, Weld Cleaning,Bristle Area:3/4",Bristle Gauge:.020",Bristle Trim:1",Case Material:Crimped Steel,Face Diameter.:3/4",Speed:20,000 RPM
|
|
7771033
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Bristle Gauge:.014",Bristle Material:Crimped Steel.,Case Material:Steel,Face Width:1-1/2",Shank Diameter:1/4",Speed:5,000 RPM,Type:Cup Brush
|
|
7771034
Wire Cup Brush
Application:Removal of carbon, rust, scale, paint, and slag.,Bristle Gauge:.014",Bristle Material:Crimped Steel.,Case Material:Steel,Face Width:2-1/2",Shank Diameter:1/4",Speed:5,000 RPM,Type:Cup Brush
|
|
7771035
Wire Wheel / Grinder
Diameter:2",Maximum RPM:4500 RPM,Wire Gauge:.014",Wire Material:High Carbon Steel,Wire Wheel Style:Crimped
|
|
7771036
Wire Wheel / Grinder
Diameter:3",Maximum RPM:4500 RPM,Wire Gauge:.014",Wire Material:High Carbon Steel,Wire Wheel Style:Crimped
|
|
7771037
Soldering Flux Brush
Bristle Material:Horse Hair,Handle Material:Steel,Length:5",Width:1/2"
|
|
7771038
Wire Brush
Type:Stainless steel curved handle scratch brush.,Length:13 9/16",Bristle Material:Stainless Steel,Bristle Area:9/16" x 5 1/2",Bristle Rows:2 x 9,Bristle Trim:1 1/8",Handle Length:13 9/16",Handle Type:Wood
|
|
7771039
Wire Brush
Type:Small stainless steel cleaning scratch brush,Length:7 7/8",Bristle Material:Stainless Steel,Bristle Area:3/8" x 1 1/4",Bristle Rows:3 x 19,Bristle Trim:9/16",Handle Length:7 7/8",Handle Type:Wood
|
|
7771040
Wire Brush
Type:Carbon steel curved handle scratch brush,Length:13 9/16",Bristle Material:Carbon Steel,Bristle Area:9/16" x 5 1/2",Bristle Rows:3 x 19,Bristle Trim:1 1/8",Handle Length:13 9/16",Handle Type:Wood
|
|
7771041
Wire Brush
Type:Carbon steel shoehandle scratch brush.,Length:11 1/4",Bristle Material:Carbon Steel,Bristle Area:3/4" x 4 1/2",Bristle Rows:4 x 16,Bristle Trim:1 1/8",Handle Length:11 1/4",Handle Type:Wood
|
|
7771042
Parts Cleaning Brush
Bristle Material:Poly,Handle Length:9",Handle Type:Plastic,Length:11 1/4",Type:Medium Parts Cleaning Brush
|
|
7771043
Soldering Flux Brush
Bristle Material:Horse Hair,Handle Material:Steel,Length:5",Width:1/2"
|
|
7771044
Wire Brush
Type:Strip Scratch Brush,Length:9-1/2",Bristle Material:Steel,Bristle Area:5",Bristle Rows:Single,Bristle Trim:7/8",Handle Length:4-1/2",Handle Type:Red Plastic
|
|
7771045
Wire Brush
Type:Strip Scratch Brush,Length:9-1/2",Bristle Material:Stainless Steel,Bristle Area:5",Bristle Rows:Single,Bristle Trim:7/8",Handle Length:4-1/2",Handle Type:Green Plastic
|
|
7771046
Wire Brush
Type:Strip Scratch Brush,Length:9-1/2",Bristle Material:Brass,Bristle Area:5",Bristle Rows:Single,Bristle Trim:7/8",Handle Length:4-1/2",Handle Type:Yellow Plastic
|
|
7771047
Wire Brush
Type:Detail Scratch Brush,Length:7-1/4",Bristle Material:Stainless Steel,Bristle Area:1",Bristle Rows:3 Rows by 7 Rows,Bristle Trim:7/16",Handle Length:7-1/4",Handle Type:Blue Plastic
|
|
7771048
Wire Brush
Type:Detail Scratch Brush,Length:7-1/4",Bristle Material:Brass,Bristle Area:1",Bristle Rows:3 Rows by 7 Rows,Bristle Trim:7/16",Handle Length:7-1/4",Handle Type:Blue Plastic
|
|
7771049
Plumbers Brush
Style Name:All Purpose Tool,Material:Plastic,Size:7" L x 3" W,Application:Inside and Outside of Tube or Pipe,Contents:Brush
|
|
7771054
Jacket - Welding
Collar Type:Leather,Features & Benefits:Chrome Tanned Side-Split Cowhide Sewn w/ Kevlar Thread, Heavy Duty Protection, Vents Under Arms & In Back to Make Jacket Cooler to Wear, 2 Soap Stone Holder & Inside Pocket, Satin Lining, Adjustable Waist Straps, Wrist Straps & 2 Snap Collar,Front & Cuff Snaps:Yes,Jacket Length:30",Jacket Material:Leather,Jacket Size:Large
|
|
7771055
Jacket - Welding
Collar Type:Leather,Features & Benefits:Chrome Tanned Side-Split Cowhide Sewn w/ Kevlar Thread, Heavy Duty Protection, Vents Under Arms & In Back to Make Jacket Cooler to Wear, 2 Soap Stone Holder & Inside Pocket, Satin Lining, Adjustable Waist Straps, Wrist Straps & 2 Snap Collar,Front & Cuff Snaps:Yes,Jacket Length:30",Jacket Material:Leather,Jacket Size:X-Large
|
|
7771056
Jacket - Welding
Collar Type:Leather,Features & Benefits:Chrome Tanned Side-Split Cowhide Sewn w/ Kevlar Thread, Heavy Duty Protection, Vents Under Arms & In Back to Make Jacket Cooler to Wear, 2 Soap Stone Holder & Inside Pocket, Satin Lining, Adjustable Waist Straps, Wrist Straps & 2 Snap Collar,Front & Cuff Snaps:Yes,Jacket Length:30",Jacket Material:Leather,Jacket Size:XX-Large
|
|
7771057
Jacket - Welding
Collar Type:Leather,Features & Benefits:Chrome Tanned Side-Split Cowhide Sewn w/ Kevlar Thread, Heavy Duty Protection, Vents Under Arms & In Back to Make Jacket Cooler to Wear, 2 Soap Stone Holder & Inside Pocket, Satin Lining, Adjustable Waist Straps, Wrist Straps & 2 Snap Collar,Front & Cuff Snaps:Yes,Jacket Length:30",Jacket Material:Leather,Jacket Size:XXX-Large
|
|
7771058
Apron - Welding
Apron Material:Leather,Apron Size:24" x 36",Features & Benefits:Made From Split Cowhide, Stress Points Reinforced w/ Steel Staples & Rivets, Ideal For Welding or Grinding Operations
|
|
7771400
Welding Hose Connector
Hose Type:Oxygen,Connection Size:1/4",Hose I.D.:1/4"
|
|
7771401
Welding Hose Connector
Hose Type:Acetylene,Connection Size:1/4",Hose I.D.:1/4"
|
|
7771402
Welding Hose Connector
Hose Type:Oxygen,Connection Size:1/4",Hose I.D.:3/16"
|
|
7771403
Welding Hose Connector
Hose Type:Acetylene,Connection Size:1/4",Hose I.D.:3/16"
|
|
7771404
Welding Hose Unions
Hose Type:Oxygen,Hose Connection Size:1/4" to 1/4"
|
|
7771405
Welding Hose Unions
Hose Type:Acetylene,Hose Connection Size:1/4" to 1/4"
|
|
7771406
Welding Hose Torch Adapter
Hose Type:Oxygen,Hose Size:1/4" to 3/16"
|
|
7771407
Welding Hose Torch Adapter
Hose Type:Acetylene,Hose Size:1/4" to 3/16"
|
|
7771408
Welding Regulator Outlet Fitting
Regulator Type:Acetylene (LH)
|
|
7771409
Welding Regulator Outlet Fitting
Regulator Type:Oxygen (RH)
|
|
7771410
Welding Hose Barbed Splicer
Hose I.D.:1/4"
|
|
7771411
Welding Hose Barbed Splicer
Hose I.D.:3/16"
|
|
7771412
Welding Hose Clamp
Hose I.D.:1/4"
|
|
7771413
Welding Hose Clamp
Hose I.D.:3/16"
|
|
7771414
Welding Hose Brass Ferrule
Hose Size:1/4"
|
|
7771415
Welding Hose Brass Ferrule
Hose Size:3/16"
|
|
7771416
Torch Lighter - Welding
# of Flints:3 Flints,Electric Discharge:No,Flint Striker:Yes
|
|
7771417
Torch Lighter Flint
Additional Contents:Replacement Flints,For BK Striker #:Fits Welding # 777-1416
|
|
7771418
Torch Lighter - Welding
# of Flints:1 Flint,Electric Discharge:No,Flint Striker:Yes
|
|
7771419
Torch Lighter Flint
Additional Contents:Replacement Flints,For BK Striker #:Fits Welding # 777-1418
|
|
7771420
Tip Cleaner - Welding
Reamer Type:Stainless Steel Reamers,Sizes:Sizes 49 to 75,Length:2",Case:Aluminum Case w/ Hinged Cover,Drill Bit Type:Stainless Steel Reamers
|
|
7771421
Hand Truck - Gas Cylinder Type
Material:Steel.,Tank Size Capability:Medium Size Tanks. (122 cu ft),Tire or Wheel Size:10" Semi Pneumatic Tires,Width:17" Wide
|
|
7771422
Hand Truck - Gas Cylinder Type
Material:Steel.,Tank Size Capability:Large Tanks. (200 cu ft),Tire or Wheel Size:18" Steel Wheels,Width:30" Wide
|
|
7771423
Hand Truck - Gas Cylinder Type
Material:Steel.,Tank Size Capability:Small & Medium Tanks. ( 122 cu ft & Smaller),Tire or Wheel Size:10" Pneumatic Wheels,Width:24" Wide
|
|
7771424
Welding Face Shield
Shade # & Tint:#9 Light,Dimensions:8",ANSI & CSA Approved:Yes,Adjustable:Yes,Hand Held:Yes
|
|
7771425
Tip Cleaner - Welding
Reamer Type:Stainless Steel Reamers,Sizes:Sizes 49 to 75,Length:3",Case:Aluminum Case w/ Hinged Cover,Drill Bit Type:Stainless Steel Long Reamers
|
|
7771426
Welding Cable Connector Set
Connector Material:Brass,Cable Gauge Capacity:4 to 1,Connector Cover:Heat & Oil Resistant Covers,Additional Contents:Cable Connector Set
|
|
7771427
Welding Cable Connector Set
Connector Material:Brass,Cable Gauge Capacity:1 to 3/0,Connector Cover:Heat & Oil Resistant Covers,Additional Contents:Cable Connector Set
|
|
7771430
Ground Clamp - Welding
AMP Capacity:300 amps,Clamp Material:Copper Alloy,Length:7"
|
|
7771431
Cable Lug / Solder Type
Cable Gauge Capacity:#6 to #2,Cable Lug Material:Copper Tubing,Optional BK Crimping Tool #:777-1635
|
|
7771432
Cable Lug / Solder Type
Cable Gauge Capacity:#1 to #2/0,Cable Lug Material:Copper Tubing,Optional BK Crimping Tool #:777-1635
|
|
7771433
Ground Clamp - Welding
AMP Capacity:200 amps,Clamp Material:Steel,Length:5"
|
|
7771434
Cable Lug / Solder Type
Cable Gauge Capacity:#6 to #6,Cable Lug Material:Copper Tubing,Optional BK Crimping Tool #:777-1635
|
|
7771435
Cable Lug / Solder Type
Cable Gauge Capacity:#4 to #6,Cable Lug Material:Copper Tubing,Optional BK Crimping Tool #:777-1635
|
|
7771436
Cable Lug / Solder Type
Cable Gauge Capacity:#2 to #6,Cable Lug Material:Copper Tubing,Optional BK Crimping Tool #:777-1635
|
|
7771437
Cable Lug / Solder Type
Cable Gauge Capacity:#1 to #2/0,Cable Lug Material:Copper Tubing,Optional BK Crimping Tool #:777-1635
|
|
7771438
Electrode Holder - Welding
AMP Capacity:400 Amps,Electrode Holder Style:Screw,Material:Heat Resistant Light Weight Nonconductive Material
|
|
7771439
Electrode Holder - Welding
AMP Capacity:300 Amps,Electrode Holder Style:Clamp,Material:Heat Resistant Light Weight Nonconductive Material w/ Fibre Glass Jaws
|
|
7771440
Welding Face Shield
Shade # & Tint:#10 Medium,Dimensions:2" x 4 1/4",ANSI & CSA Approved:Yes,Adjustable:No,Hand Held:Yes
|
|
7771441
Ground Clamp - Welding
AMP Capacity:300 amps,Clamp Material:Copper Alloy,Length:6"
|
|
7771442
Ground Clamp - Welding
AMP Capacity:500 amps,Clamp Material:Steel,Length:7"
|
|
7771443
Power Cord Receptacle
NIEMA Rating:6-50-r,Plug Blade Name:Parallel Blade Receptacle,UL Approved:Yes,Voltage & AMP Rating:230 Volts, 50 amps
|
|
7771444
Power Cord Plug
NIEMA Rating:6-50-p,Plug Blade Name:Parallel,UL Approved:Yes,Voltage & AMP Rating:230 Volts, 50 amps
|
|
7771445
Soapstone Holder
Additional Contents:Flat Soapstone Holder & 1 Flat Soapstone,Built-In Sharpener:No,Holder Material:Steel,Soapstone Shape:Flat
|
|
7771446
Chipping Hammer - Welding
Hammer End Types:Chisel End & Pointed Taper,Brush Attached:No,Function:Cleans Flux & Welding Slag from Metal,Handle Type:Wooden,Material:Steel
|
|
7771447
Chipping Hammer - Welding
Hammer End Types:Chisel,Brush Attached:Yes,Function:Cleans Flux & Welding Slag from Metal,Handle Type:Spring Wound Steel,Material:Steel
|
|
7771448
Chipping Hammer - Welding
Hammer End Types:Replacement Brush,Brush Attached:No,Function:To Clean Flux & Welding Slag from Metal,Material:Steel
|
|
7771449
Soapstone
Length:6",Quantity:10,Shape:Flat
|
|
7771450
Welding Hat
Hat Color:Black,Hat Size:7 1/4,Hat Material:Quilted Fire Resistant Cotton,Hat Style Name:Skull Cap w/ Small Bill
|
|
7771451
Welding Helmet
Lens Size:2" x 4-1/4" Lift Front Lens,Lens Shade:#10 Filter Plate,Auto Darkening Lens:No,Features & Benefits:Super Tough, Economical & Light, Works As Fixed Front & / or As Lift Front, Lighter Than Ordinary Helmets, Helmet Is Black,Lift Shade Lens:No,Meet Standards:Yes
|
|
7771452
Welding Helmet Lens
Dimensions:4 1/2" x 5 1/4",Shade Number & Tint:#9 Light,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771453
Welding Helmet Lens
Dimensions:4 1/2" x 5 1/4",Shade Number & Tint:#10 Medium,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771454
Welding Helmet Lens
Dimensions:4 1/2" x 5 1/4",Shade Number & Tint:#11 Dark,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771455
Welding Helmet Headgear
Ratchet Adjustment:Yes,BK Helmet Application:Fits Part #(s) 777-1808, 111-1451, 777-1802, 777-1806, 777-1805,Adjustable:Yes
|
|
7771456
Welding Helmet Lens
Dimensions:2" x 4 1/2",Shade Number & Tint:#11 Dark,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771457
Welding Helmet Lens
Dimensions:4 1/2" x 5 1/4",Shade Number & Tint:#10 Gold,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771459
Welding Helmet Lens
Dimensions:4 1/2" x 5 1/4",Shade Number & Tint:Clear,Magnifying Lens:No,Outer Cover Lens:Yes
|
|
7771460
Welding Helmet Lens
Dimensions:2" x 4 1/2",Shade Number & Tint:Clear,Magnifying Lens:No,Outer Cover Lens:Yes
|
|
7771461
Welding Helmet Lens
Dimensions:2" x 4 1/2",Shade Number & Tint:Clear,Magnifying Lens:No,Outer Cover Lens:Yes
|
|
7771462
Welding Helmet Lens
Dimensions:2" x 4 1/2",Shade Number & Tint:Clear,Magnifying Lens:Yes,Outer Cover Lens:Yes
|
|
7771463
Welding Helmet Lens
Dimensions:2" x 4 1/2",Shade Number & Tint:Clear,Magnifying Lens:Yes,Outer Cover Lens:Yes
|
|
7771464
Welding Helmet Headgear
Ratchet Adjustment:Yes,BK Helmet Application:Fits Part #(s) 777-1800, 777-1801, 777-1804, 777-1807,Adjustable:Yes
|
|
7771465
Gloves
Cuff Type:Turned Cuff,Glove Cut:Gunn Cut,Glove Material:Hige Grade Chrome Tanned Leather w/ Lining,Glove Style:Deluxe Welding Gloves,Hand Size:Large,Lining Type:Yes,Stitch Type:Lock Stitch,Welted Seams:Yes
|
|
7771466
Welding Goggles
Goggle Style:Box,Lift Up Cover:Yes,Shade Number & Tint:#5 Medium Green,Ventilated:Yes
|
|
7771467
Welding Goggles
Goggle Style:Cup,Lift Up Cover:No,Shade Number & Tint:#5 Medium Green,Ventilated:Yes
|
|
7771468
Welding Goggles
Goggle Style:Cup,Lift Up Cover:No,Shade Number & Tint:#5 Medium Green,Ventilated:Yes
|
|
7771470
Welding Goggles
Goggle Style:Cup,Lift Up Cover:No,Shade Number & Tint:#5 Medium Green,Ventilated:Yes
|
|
7771471
Gloves
Glove Material:Select Side Split Leather,Glove Style:Work gloves,Hand Size:Large,Lining Type:No,Stitch Type:Lock Stitch,Welted Seams:No
|
|
7771472
Gloves
Glove Length:9",Glove Material:Leather & Canvas,Glove Style:Leather Work Gloves,Hand Size:Large,Lining Type:No,Stitch Type:Lock Stitch,Welted Seams:No
|
|
7771473
Welding Helmet Lens
Dimensions:50 mm Round,Shade Number & Tint:#4 Light Green,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771474
Welding Helmet Lens
Dimensions:50 mm Round,Shade Number & Tint:#5 Medium Green,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771475
Welding Helmet Lens
Dimensions:50 mm Round,Shade Number & Tint:#6 Medium Dark Green,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771476
Welding Helmet Lens
Dimensions:2" x 4 1/2",Shade Number & Tint:#10 Gold,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771478
Welding Helmet Lens
Shade Number & Tint:#2 Green,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771479
Welding Helmet Lens
Shade Number & Tint:#5 Green,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771480
Welding Goggles
Goggle Style:Box,Lift Up Cover:Yes,Shade Number & Tint:#5 Medium Green,Ventilated:Yes
|
|
7771481
Welding Helmet Lens
Dimensions:50 mm Round,Shade Number & Tint:Clear,Magnifying Lens:No,Outer Cover Lens:Yes
|
|
7771482
Safety Glasses
ANSI Approved:Yes,SEI Certified:Yes,Shade # & Tint:Clear,Shape or Style:Modern
|
|
7771483
Safety Glasses
ANSI Approved:Yes,SEI Certified:Yes,Shade # & Tint:#2,Shape or Style:Modern
|
|
7771484
Welding Helmet Lens
Dimensions:2" x 4 1/2",Shade Number & Tint:#5 Medium Green,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771485
Welding Goggles
Lift Up Cover:No,Shade Number & Tint:#5 Medium Green,Ventilated:Yes
|
|
7771486
Safety Glasses
ANSI Approved:No,SEI Certified:No,Shade # & Tint:Clear,Shape or Style:Conventional
|
|
7771487
Safety Glasses
ANSI Approved:No,SEI Certified:No,Shade # & Tint:#2,Shape or Style:Conventional
|
|
7771488
Gloves
Cuff Type:Turned Cuff,Glove Cut:Gunn Cut,Glove Material:Sholder Split Leather,Glove Style:Economy Welder Gloves,Hand Size:Large,Lining Type:Yes,Stitch Type:Lock Stitch,Welted Seams:Yes
|
|
7771489
Gloves
Cuff Type:Turned Cuff,Glove Cut:Gunn Cut,Glove Length:11",Glove Material:Top Grain Leather,Glove Style:Tig Welders Gloves,Hand Size:Large,Lining Type:No,Stitch Type:Lock Stitch,Welted Seams:Yes
|
|
7771490
Apron - Welding
Apron Material:Green Sateen,Apron Size:Large,Government Spec. #:DOC-FF-77-75
|
|
7771491
Jacket - Welding
Collar Type:Stand Up Collar,Front & Cuff Snaps:Yes,Government Spec. #:DOC-FF-77-75,Jacket Length:30",Jacket Material:Green Sateen,Jacket Size:Large
|
|
7771492
Cape & Sleeve Cover - Welding
Government Spec. #:DOC-FF-77-75,Material:Green Sateen,Optional Bib BK #:777-1490,Size:Large
|
|
7771493
Bib - Welding
Bib Material:Green Sateen,Bib Size:Large,Government Spec. #:DOC-FF-77-75,Will Fit BK Cape #:777-1492
|
|
7771494
Wrench - Welding Tank
Wrench Size:Universal Style,Wrench Length:Aprox. 6"
|
|
7771495
Anti-Splatter Chemical - Welding
Application:Mig Welding,Prevents Build Up in Nozzle:Yes,Spray or Gel:Gel
|
|
7771496
Welding Hose Crimping Tool
Ferrule Size:1/4"
|
|
7771497
Welding Hose Barbed Nipple
Size:Size B,Hose I.D.:3/16"
|
|
7771498
Welding Hose Barbed Nipple
Size:Size B,Hose I.D.:1/4"
|
|
7771499
Welding Hose Barbed Nipple Nut
Nut Size:Size B
|
|
7771500
Welding Hose Barbed Nipple Nut
Nut Size:Size B
|
|
7771501
Welding Blanket
Blanket Material:Fiberglass/ Silicone,Dimensions:38" x 24",Melting Temperature:1200 Degrees,Primary Function:Protects Surrounding Areas from Sparks
|
|
7771502
Chipping Hammer - Welding
Hammer End Types:Chisel End & Pointed Taper,Brush Attached:No,Function:Cleans Flux & Welding Slag from Metal,Handle Type:Spring Wound Steel,Material:Steel
|
|
7771503
Tape Measure
Tape Length:48",Tape Width:4",Tape Material:Non Metallic Material,Top & Bottom Increment Marks:Yes
|
|
7771504
Soapstone Holder
Additional Contents:Round Soapstone Holder & 1 Round Soapstone,Built-In Sharpener:Yes,Holder Material:Aluminum,Soapstone Shape:Round
|
|
7771505
Pick Set / 4 Way
Length:3",Length:7",Material:Tempered Steel Tips & Aluminium Handle,Tips:Four Different Tips
|
|
7771506
Soapstone
Length:6",Quantity:10,Shape:Round
|
|
7771507
Tip Cleaner - Welding
Reamer Type:Drills,Sizes:Sizes 52 to 74,Length:1 1/2",Case:Aluminum Handle w/ Drill Collet & Drill Storage in Handle,Drill Bit Type:High Speed Tip Twist Drills
|
|
7771508
Magnet
Handle Material:Aluminum,Handle Type:A Flexible Copper Handle,Length:15"
|
|
7771509
Mirror
Handle Material:Mirror Acryllic Plastic.,Handle Type:A Flexible Aluminum Handle,Length:14",Mirror Dimensions:2"x 3 1/2"
|
|
7771510
Marking Pencil / Thin Line
Additional Contents:3 Red & 3 Silver Thinline Marking Pencil Refills,Body Material:Steel Body,Recommended Surfaces:Works on Wet & Oily Surfaces,Shape:Flat
|
|
7771511
Marking Pencil Refill / Thin Line
Additional Contents:6 Silver Thinline Pencil Refills,For BK Marking Pencil #:Fit Welding Accessories # 777-1510,Recommended Surfaces:Works on Wet & Oily Surfaces,Refill Color:Silver
|
|
7771512
Marking Pencil Refill / Thin Line
Additional Contents:6 Red Thinline Pencil Refills,For BK Marking Pencil #:Fit Welding Accessories # 777-1510,Recommended Surfaces:Works on Wet & Oily Surfaces,Refill Color:Red
|
|
7771513
Utility Knife / Welder's
Blade Type:Razor Sharp Blades,Length:6",Material:Aluminum Handle & Steel Blades
|
|
7771514
Deburring Tool
Length:Aprox 5",Material:Heat Treated Tempered Steel,Tool Function:To Smooth Out Freshly Cut Metal & Plastic Tubing
|
|
7771515
Locking Pliers - Welding
Jaw Style:C-Clamp,Length:12",Clamping Range:0" to 3",Function:To Hold 2 Pieces of Metal Together
|
|
7771516
Locking Pliers - Welding
Jaw Style:2 Jaw Weld Clamp,Length:11",Clamping Range:0" to 2",Function:To Hold 2 Pieces of Metal Together
|
|
7771517
C Clamp
Material:Malleable Iron,Protective Coating:Copper Plating,Size:2"
|
|
7771518
C Clamp
Material:Malleable Iron,Protective Coating:Copper Plating,Size:3"
|
|
7771519
C Clamp
Material:Malleable Iron,Protective Coating:Copper Plating,Size:4"
|
|
7771520
C Clamp
Material:Malleable Iron,Protective Coating:Copper Plating,Size:5"
|
|
7771521
C Clamp
Material:Malleable Iron,Protective Coating:Copper Plating,Size:6"
|
|
7771522
Scribe
Surface Types:Metal, Glass, Plastic, & Tools,Tip Material:Tungsten Carbide
|
|
7771523
Emery Cloth
Grit:80 Grit,Length:25 Yards,Material:Aluminum Oxide on a Resin Bonded Cotton Fabric,Optional Liquids For Use:Oil or any Cutting Fluid Lubricants,Recommended Surfaces:All Ferrous Metals, Hardwoods, Leather, Aluminum, Brass, Bronze, Stainless Steel, & most Alloys,Width:1" Wide
|
|
7771524
Emery Cloth
Grit:120 Grit,Length:25 Yards,Material:Aluminum Oxide on a Resin Bonded Cotton Fabric,Optional Liquids For Use:Oil or any Cutting Fluid Lubricants,Recommended Surfaces:All Ferrous Metals, Hardwoods, Leather, Aluminum, Brass, Bronze, Stainless Steel, & most Alloys,Width:1" Wide
|
|
7771525
Emery Cloth
Grit:180 Grit,Length:25 Yards,Material:Aluminum Oxide on a Resin Bonded Cotton Fabric,Optional Liquids For Use:Oil or any Cutting Fluid Lubricants,Recommended Surfaces:All Ferrous Metals, Hardwoods, Leather, Aluminum, Brass, Bronze, Stainless Steel, & most Alloys,Width:1" Wide
|
|
7771526
Emery Cloth
Grit:320 Grit,Length:25 Yards,Material:Aluminum Oxide on a Resin Bonded Cotton Fabric,Optional Liquids For Use:Oil or any Cutting Fluid Lubricants,Recommended Surfaces:All Ferrous Metals, Hardwoods, Leather, Aluminum, Brass, Bronze, Stainless Steel, & most Alloys,Width:1" Wide
|
|
7771531
Abrasive Surface Discs / Quick-Change
Color:Grey,Diameter:3",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Coarse,Material:Tough Fibers Bonded w/ Aluminum Oxide,Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771532
Abrasive Surface Discs / Quick-Change
Color:Maroon,Diameter:3",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Medium,Material:Tough Fibers Bonded w/ Aluminum Oxide,Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771533
Abrasive Surface Discs / Quick-Change
Color:Brown,Diameter:3",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Fine,Material:Tough Fibers Bonded w/ Aluminum Oxide,Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771534
Abrasive Surface Discs / Quick-Change
Diameter:3",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Backing Pad,Mandrel Size:1/4",Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771535
Abrasive Surface Discs / Quick-Change
Color:Grey,Diameter:2",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Fine,Material:Tough Fibers Bonded w/ Aluminum Oxide,Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771536
Abrasive Surface Discs / Quick-Change
Color:Maroon,Diameter:2",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Medium,Material:Tough Fibers Bonded w/ Aluminum Oxide,Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771537
Abrasive Surface Discs / Quick-Change
Color:Brown,Diameter:2",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Coarse,Material:Tough Fibers Bonded w/ Aluminum Oxide,Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771539
Abrasive Surface Discs / Quick-Change
Diameter:2",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Backing Pad,Mandrel Size:1/4",Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771540
Abrasive Surface Discs / Quick-Change
Color:Grey,Diameter:2",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Fine,Material:Tough Fibers Bonded w/ Aluminum Oxide,Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771541
Abrasive Surface Discs / Quick-Change
Color:Maroon,Diameter:2",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Medium,Material:Tough Fibers Bonded w/ Aluminum Oxide,Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771542
Abrasive Surface Discs / Quick-Change
Color:Brown,Diameter:2",Disc Attaches By:Roll on Roll Off Locking Device,Grit or Grade:Coarse,Material:Tough Fibers Bonded w/ Aluminum Oxide,Optional Liquids For Use:Water & most Solvents,Recommended Surfaces:Cleaning, Finishing, Preparing
|
|
7771543
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:3",Grit:60 Grit,Maximum RPM:20,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771544
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:3",Grit:80 Grit,Maximum RPM:20,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771545
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:3",Grit:120 Grit,Maximum RPM:20,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771546
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:2",Grit:60 Grit,Maximum RPM:25,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771547
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:2",Grit:80 Grit,Maximum RPM:25,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771548
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:2",Grit:120 Grit,Maximum RPM:25,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771549
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1 1/2",Grit:60 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1/2"
|
|
7771550
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1 1/2",Grit:80 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1/2"
|
|
7771551
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1 1/2",Grit:120 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1/2"
|
|
7771552
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1",Grit:60 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771553
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1",Grit:80 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771554
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1",Grit:120 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771555
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:5",Disc Material:Resin-fiber,Grit:16 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771556
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:5",Disc Material:Resin-fiber,Grit:24 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771557
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:5",Disc Material:Resin-fiber,Grit:36 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771558
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:5",Disc Material:Resin-fiber,Grit:50 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771559
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:5",Disc Material:Resin-fiber,Grit:80 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771560
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:5",Disc Material:Resin-fiber,Grit:100 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771561
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:5",Disc Material:Resin-fiber,Grit:120 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771562
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:7",Disc Material:Resin-fiber,Grit:16 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771563
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:7",Disc Material:Resin-fiber,Grit:24 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771564
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:7",Disc Material:Resin-fiber,Grit:36 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771565
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:7",Disc Material:Resin-fiber,Grit:50 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771566
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:7",Disc Material:Resin-fiber,Grit:80 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771567
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:7",Disc Material:Resin-fiber,Grit:100 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771568
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:7",Disc Material:Resin-fiber,Grit:120 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771569
Cut-Off Wheel
Diameter:3" Dia,Arbor Shape:Round,Thickness:1/16",Arbor Size:1/4" Arbor,Cuts What Material:Steel,Maximum RPM:25,000 RPM Max
|
|
7771570
Cut-Off Wheel
Diameter:3" Dia,Arbor Shape:Round,Thickness:1/16",Arbor Size:3/8" Arbor,Cuts What Material:Steel,Maximum RPM:25,000 RPM Max
|
|
7771571
Cut-Off Wheel
Diameter:3" Dia,Arbor Shape:Round,Thickness:1/8",Arbor Size:1/4" Arbor,Cuts What Material:Steel,Maximum RPM:25,000 RPM Max
|
|
7771572
Cut-Off Wheel
Diameter:3" Dia,Arbor Shape:Round,Thickness:1/8",Arbor Size:1/8" Arbor,Cuts What Material:Steel,Maximum RPM:25,000 RPM Max
|
|
7771573
Cut-Off Wheel
Diameter:4" Dia,Arbor Shape:Round,Thickness:1/16",Arbor Size:3/8" Arbor,Cuts What Material:Steel,Maximum RPM:15,300 RPM Max
|
|
7771574
Cut-Off Wheel
Diameter:4" Dia,Arbor Shape:Round,Thickness:1/8",Arbor Size:3/8" Arbor,Cuts What Material:Steel,Maximum RPM:15,300 RPM Max
|
|
7771575
Cut-Off Wheel
Diameter:4" Dia,Arbor Shape:Round,Thickness:1/16",Arbor Size:5/8" Arbor,Cuts What Material:Steel,Maximum RPM:15,300 RPM Max
|
|
7771576
Cut-Off Wheel
Diameter:4 I/2" Dia,Arbor Shape:Round,Thickness:3/32",Arbor Size:3/8" Arbor,Cuts What Material:Steel,Maximum RPM:13,300 RPM Max
|
|
7771577
Cut-Off Wheel Mandrel Set
Arbor Size:Arbor Sizes are 1/4" & 3/8",Shank Size:1/4" Shank Size
|
|
7771578
Grinding Wheel
Arbor Size:5/8",Arbor Thread Size:5/8",Depressed Center:Yes,Diameter:4",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:13,700 RPM,Support Pad Required:No,Thickness:1/8",Type Number:Type 27
|
|
7771579
Grinding Wheel
Arbor Size:5/8",Arbor Thread Size:5/8",Depressed Center:Yes,Diameter:4",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:13,700 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771580
Grinding Wheel
Arbor Size:7/8",Arbor Thread Size:7/8",Depressed Center:Yes,Diameter:4 1/2",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:11,900 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771581
Grinding Wheel
Arbor Size:7/8",Arbor Thread Size:7/8",Depressed Center:Yes,Diameter:5",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:11,900 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771582
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:5/8 - NC11,Depressed Center:Yes,Diameter:7",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:8,500 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771583
Grinding Wheel
Arbor Size:7/8",Arbor Thread Size:7/8",Depressed Center:Yes,Diameter:7",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:8,500 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771584
Grinding Wheel
Arbor Size:7/8",Arbor Thread Size:7/8",Depressed Center:Yes,Diameter:9",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:6,500 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771585
Grinding Wheel
Arbor Size:7/8",Arbor Thread Size:7/8",Depressed Center:Yes,Diameter:9",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:6,500 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771586
Sander Backing Plate / Pad
Construction Material:Flexible Rubber,Diameter:5",Thread Size:5/8" x 11NC
|
|
7771587
Sander Backing Plate / Pad
Construction Material:Flexible Rubber,Diameter:7",Thread Size:5/8" x 11NC
|
|
7771588
Grinding Disc Adapter Assy
Additional Contents:Disk Adapter, Hub Nut, Hex Wrench, & Washers,Arbor Thread Size:5/8" - 11NCRH,Function:To Mount a Raised Hub Disc w/ 7/8" Hole to Standard Right Angle
|
|
7771589
Cut-Off Wheel
Diameter:12" Dia,Arbor Shape:Round,Thickness:3/32",Arbor Size:1" Arbor,Cuts What Material:Steel,Maximum RPM:5,000 RPM Max
|
|
7771590
Cut-Off Wheel
Diameter:14" Dia,Arbor Shape:Round,Thickness:3/32",Arbor Size:1" Arbor,Cuts What Material:Steel,Maximum RPM:4,400 RPM Max
|
|
7771591
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:38000 RPM,Style or Shape:A2,Thickness:1 1/4"
|
|
7771592
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1 1/4",Mandrel Size:1/4",Maximum RPM:20000 RPM,Style or Shape:A4,Thickness:1 1/4"
|
|
7771593
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:3/4",Mandrel Size:1/4",Maximum RPM:45000 RPM,Style or Shape:A5,Thickness:1 1/8"
|
|
7771594
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:7/8",Mandrel Size:1/4",Maximum RPM:20000 RPM,Style or Shape:A11,Thickness:2"
|
|
7771595
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:3/4",Mandrel Size:1/4",Maximum RPM:48000 RPM,Style or Shape:A12,Thickness:1 1/4"
|
|
7771596
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1/4",Mandrel Size:1/4",Maximum RPM:72000 RPM,Style or Shape:A15,Thickness:1 1/16"
|
|
7771597
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:3/4",Mandrel Size:1/4",Maximum RPM:39000 RPM,Style or Shape:A23,Thickness:1"
|
|
7771598
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1/4",Mandrel Size:1/4",Maximum RPM:35000 RPM,Style or Shape:A24,Thickness:3/4"
|
|
7771599
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:28000 RPM,Style or Shape:A25,Thickness:1"
|
|
7771600
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:34000 RPM,Style or Shape:A38,Thickness:1"
|
|
7771601
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:34000 RPM,Style or Shape:W218,Thickness:1/2"
|
|
7771602
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:25000 RPM,Style or Shape:W220,Thickness:1"
|
|
7771603
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:5/8 - NC11,Depressed Center:Yes,Diameter:5",Grinding Material:Rust & other Misc. Deposits,Grinding Wheel Material:Resinoid Bond,Maximum RPM:7,260 RPM,Support Pad Required:No,Thickness:2",Type Number:Type 11
|
|
7771604
Grinder Spindle Nut
Thread Size:5/8" - 11NC,Washer Attached:Yes
|
|
7771605
Cut-Off Wheel
Diameter:7" Dia,Arbor Shape:Round,Thickness:1/8",Arbor Size:5/8,Cuts What Material:Steel,Maximum RPM:7,600 RPM Max
|
|
7771606
Flap Disc / Sanding & Grinding
Arbor Hole Size:7/8" Arbor Hole,Diameter:4 1/2",Grit:30 Grit,Material:Aluminum Oxide Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:13,500 RPM,Recommended Surfaces:Most Metals
|
|
7771607
Flap Disc / Sanding & Grinding
Arbor Hole Size:7/8" Arbor Hole,Diameter:4 1/2",Grit:60 Grit,Material:Aluminum Oxide Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:13,500 RPM,Recommended Surfaces:Most Metals
|
|
7771608
Flap Disc / Sanding & Grinding
Arbor Hole Size:7/8" Arbor Hole,Diameter:4 1/2",Grit:80 Grit,Material:Aluminum Oxide Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:13,500 RPM,Recommended Surfaces:Most Metals
|
|
7771609
Flap Disc / Sanding & Grinding
Arbor Hole Size:7/8" Arbor Hole,Diameter:7",Grit:30 Grit,Material:Aluminum Oxide Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:8,600 RPM,Recommended Surfaces:Most Metals
|
|
7771610
Flap Disc / Sanding & Grinding
Arbor Hole Size:7/8" Arbor Hole,Diameter:7",Grit:60 Grit,Material:Aluminum Oxide Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:8,600 RPM,Recommended Surfaces:Most Metals
|
|
7771611
Flap Disc / Sanding & Grinding
Arbor Hole Size:7/8" Arbor Hole,Diameter:7",Grit:80 Grit,Material:Aluminum Oxide Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:8,600 RPM,Recommended Surfaces:Most Metals
|
|
7771612
Flap Disc / Sanding & Grinding
Arbor Hole Size:5/8" x 11NC,Arbor Thread Size:5/8" x 11NC,Diameter:4 1/2",Grit:36 Grit,Material:Zirconium Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:13,500 RPM,Recommended Surfaces:Most Metals
|
|
7771613
Flap Disc / Sanding & Grinding
Arbor Hole Size:5/8" x 11NC,Arbor Thread Size:5/8" x 11NC,Diameter:4 1/2",Grit:60 Grit,Material:Zirconium Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:13,500 RPM,Recommended Surfaces:Most Metals
|
|
7771614
Flap Disc / Sanding & Grinding
Arbor Hole Size:5/8" x 11NC,Arbor Thread Size:5/8" x 11NC,Diameter:7",Grit:36 Grit,Material:Zirconium Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:8,600 RPM,Recommended Surfaces:Most Metals
|
|
7771615
Flap Disc / Sanding & Grinding
Arbor Hole Size:5/8" x 11NC,Arbor Thread Size:5/8" x 11NC,Diameter:7",Grit:60 Grit,Material:Zirconium Cloth Mounted on a Aluminum Backing Disk,Maximum RPM:8,600 RPM,Recommended Surfaces:Most Metals
|
|
7771616
Rotary File - Burr
Acceptable Power Tools:Air or Electric Tools,Diameter:1/2",Flute Length:7/8",Material:High Quality Tool Steel,Shank Size:1/4",Shape:Cylindrical (A)
|
|
7771617
Rotary File - Burr
Acceptable Power Tools:Air or Electric Tools,Diameter:1/2",Flute Length:7/8",Material:High Quality Tool Steel,Shank Size:1/4",Shape:Round Tree (B)
|
|
7771618
Rotary File - Burr
Acceptable Power Tools:Air or Electric Tools,Diameter:1/2",Flute Length:1/2",Material:High Quality Tool Steel,Shank Size:1/4",Shape:Ball (C)
|
|
7771619
Rotary File - Burr
Acceptable Power Tools:Air or Electric Tools,Diameter:1/2",Flute Length:7/8",Material:High Quality Tool Steel,Shank Size:1/4",Shape:Cylindrical Ball Nose (E)
|
|
7771620
Rotary File - Burr
Acceptable Power Tools:Air or Electric Tools,Diameter:1/2",Flute Length:7/8",Material:High Quality Tool Steel,Shank Size:1/4",Shape:14 degree Included Angle (D)
|
|
7771621
Rotary File - Burr
Acceptable Power Tools:Air or Electric Tools,Diameter:Kit,Flute Length:Kit,Material:High Quality Tool Steel,Shank Size:1/4",Shape:Kit
|
|
7771622
Cut-Off Wheel
Diameter:3" Dia,Arbor Shape:Diamond,Thickness:1/32",Arbor Size:3/8" Arbor,Cuts What Material:Steel,Maximum RPM:25,000 RPM Max
|
|
7771623
Cut-Off Wheel
Diameter:4" Dia,Arbor Shape:Round,Thickness:1/32",Arbor Size:3/8" Arbor,Cuts What Material:Steel,Maximum RPM:15,300 RPM Max
|
|
7771624
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:5/8 - NC11,Depressed Center:Yes,Diameter:4 1/2",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:11,900 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771625
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:5/8 - NC11,Depressed Center:Yes,Diameter:7",Grinding Material:Aluminium,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:8,500 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771627
Grinding Wheel Dressing Stone
Dimensions:6" x 1" x 1",Grinding Wheel Type:Type 1 Vitrified Bench Grinding Wheels,Grit:24 Grit,Material:Premium Grade Aluminum Oxide
|
|
7771628
Grinding Wheel Arbor Reducer Bushing
Arbor Reduction Sizes:1/2", 5/8", 3/4", 1",Grinding Wheel Type:Works w/ a 1 1/4" Arbor Hole Wheel
|
|
7771629
Cable Cutter
Acceptable Cable Material:Copper & Aluminum Cable & Rubber Hose,Cable Gauge Range:4/0 thru 6/4,Function:To Cut Welding Cable,Tool Length:7",Tool Material:Steel
|
|
7771630
Torch Lighter - Welding
# of Flints:0 Flints,Electric Discharge:Yes,Flint Striker:No
|
|
7771631
MIG Welder Tool
Functions:Spatter Removal from Nozzle, Tip Removal, Hammer, Wire Cutting, Tip Installation,Material:Steel,Length:7",Spring Loaded:Yes
|
|
7771632
Magnetic Holder
Angles:40 Degrees, 90 Degrees, 135 Degrees,Dimensions:2" x 2 1/2" x 1/2",Direct Hold Capacity:20 lb,Holder Material:Anisotropic Ferite Magnet & Steel Plate,Lift Capacity:20 lb,Net Weight Capacity:.50 lbs,Primary Function:Used as a Layout Tool
|
|
7771633
Magnetic Holder
Angles:40 Degrees, 90 Degrees, 135 Degrees,Dimensions:2 3/4" x 3 1/4" x 9/16",Direct Hold Capacity:33 lb,Holder Material:Anisotropic Ferite Magnet & Steel Plate,Lift Capacity:45 lb,Net Weight Capacity:.75 lbs,Primary Function:Used as a Layout Tool
|
|
7771634
Magnetic Holder
Angles:40 Degrees, 90 Degrees, 135 Degrees,Dimensions:3 5/8" x 4 1/16" x 3/4",Direct Hold Capacity:55 lb,Holder Material:Anisotropic Ferite Magnet & Steel Plate,Lift Capacity:80 lb,Net Weight Capacity:1.65 lbs,Primary Function:Used as a Layout Tool
|
|
7771635
Crimping Tool - Welding
Function:To Install Terminal Ends Permanantly to Welding Cable,Material:Steel
|
|
7771636
Cut-Off Wheel
Diameter:7" Dia,Arbor Shape:Diamond,Thickness:1/8",Arbor Size:5/8" Arbor,Cuts What Material:Masonry,Maximum RPM:8,700 RPM Max
|
|
7771637
Cut-Off Wheel
Diameter:12" Dia,Arbor Shape:Round,Thickness:1/8",Arbor Size:1" Arbor,Cuts What Material:Masonry,Maximum RPM:5,100 RPM Max
|
|
7771638
Cut-Off Wheel
Diameter:14" Dia,Arbor Shape:Round,Thickness:1/8",Arbor Size:1" Arbor,Cuts What Material:Masonry,Maximum RPM:4,400 RPM Max
|
|
7771639
Grinding Wheel
Arbor Size:5/8",Arbor Thread Size:n/a,Depressed Center:Yes,Diameter:4",Grinding Material:Masonry,Maximum RPM:13,700 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771640
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:5/8 - NC11,Depressed Center:Yes,Diameter:7",Grinding Material:Masonry,Maximum RPM:8,500 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 27
|
|
7771641
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:5/8 - NC11,Depressed Center:Yes,Diameter:7",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:8,500 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 28
|
|
7771642
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:5/8 - NC11,Depressed Center:Yes,Diameter:9",Grinding Material:Steel,Grinding Wheel Material:Aluminium Oxide,Maximum RPM:6,500 RPM,Support Pad Required:No,Thickness:1/4",Type Number:Type 28
|
|
7771643
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:5/8",Depressed Center:No,Diameter:4",Grinding Material:Many Kinds of Materials,Maximum RPM:13,700 RPM,Support Pad Required:Yes,Thickness:1/8"
|
|
7771644
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:5/8",Depressed Center:No,Diameter:4",Grinding Material:Many Kinds of Materials,Maximum RPM:13,700 RPM,Support Pad Required:Yes,Thickness:1/8"
|
|
7771645
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:7/8",Depressed Center:No,Diameter:7",Grinding Material:Many Kinds of Materials,Maximum RPM:8,500 RPM,Support Pad Required:Yes,Thickness:1/8"
|
|
7771646
Grinding Wheel
Arbor Size:5/8" - NC11,Arbor Thread Size:7/8",Depressed Center:No,Diameter:7",Grinding Material:Many Kinds of Materials,Maximum RPM:8,500 RPM,Support Pad Required:Yes,Thickness:1/8"
|
|
7771647
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:3",Grit:60 Grit,Maximum RPM:20,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771648
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:3",Grit:80 Grit,Maximum RPM:20,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771649
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:3",Grit:120 Grit,Maximum RPM:20,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771650
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:2",Grit:60 Grit,Maximum RPM:25,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771651
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:2",Grit:80 Grit,Maximum RPM:25,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771652
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:2",Grit:120 Grit,Maximum RPM:25,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771653
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1 1/2",Grit:60 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1/2"
|
|
7771654
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1 1/2",Grit:80 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1/2"
|
|
7771655
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1 1/2",Grit:120 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1/2"
|
|
7771656
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1",Grit:60 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771657
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1",Grit:80 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771658
Flap Wheel / Sanding & Grinding
Construction Material:Aluminium Oxide Resin Bonded to Strong Cloth,Diameter:1",Grit:120 Grit,Maximum RPM:30,000 RPM,Recommended Surfaces:Metal & Wood,Width:1"
|
|
7771659
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:38000 RPM,Style or Shape:A2,Thickness:1 1/4"
|
|
7771660
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1 1/4",Mandrel Size:1/4",Maximum RPM:20000 RPM,Style or Shape:A4,Thickness:1 1/4"
|
|
7771661
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:3/4",Mandrel Size:1/4",Maximum RPM:45000 RPM,Style or Shape:A5,Thickness:1 1/8"
|
|
7771662
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:7/8",Mandrel Size:1/4",Maximum RPM:20000 RPM,Style or Shape:A11,Thickness:2"
|
|
7771663
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:3/4",Mandrel Size:1/4",Maximum RPM:48000 RPM,Style or Shape:A12,Thickness:1 1/4"
|
|
7771664
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1/4",Mandrel Size:1/4",Maximum RPM:72000 RPM,Style or Shape:A15,Thickness:1 1/16"
|
|
7771665
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:3/4",Mandrel Size:1/4",Maximum RPM:39000 RPM,Style or Shape:A23,Thickness:1"
|
|
7771666
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1/4",Mandrel Size:1/4",Maximum RPM:35000 RPM,Style or Shape:A24,Thickness:3/4"
|
|
7771667
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:28000 RPM,Style or Shape:A25,Thickness:1"
|
|
7771668
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:34000 RPM,Style or Shape:A38,Thickness:1"
|
|
7771669
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:34000 RPM,Style or Shape:W218,Thickness:1/2"
|
|
7771670
Grinding Points / Mounted
Construction Material:Aluminium Oxide,Diameter:1",Mandrel Size:1/4",Maximum RPM:25000 RPM,Style or Shape:W220,Thickness:1"
|
|
7771671
Grinding Wheel
Arbor Size:1/4",Arbor Thread Size:n/a,Depressed Center:No,Diameter:1",Grinding Material:Carbon, Steel, Wrought Iron, Bronze, & many other Metals,Grinding Wheel Material:Vitrified Aluminium Oxide,Grit:60 Grit,Mandrel Size:1/4",Maximum RPM:3,450 RPM,Support Pad Required:No,Thickness:1"
|
|
7771672
Grinding Wheel
Arbor Size:1/4",Arbor Thread Size:n/a,Depressed Center:No,Diameter:1 1/2",Grinding Material:Carbon, Steel, Wrought Iron, Bronze, & many other Metals,Grinding Wheel Material:Vitrified Aluminium Oxide,Grit:60 Grit,Mandrel Size:1/4",Maximum RPM:3,450 RPM,Support Pad Required:No,Thickness:1"
|
|
7771673
Grinding Wheel
Arbor Size:1/4",Arbor Thread Size:n/a,Depressed Center:No,Diameter:2",Grinding Material:Carbon, Steel, Wrought Iron, Bronze, & many other Metals,Grinding Wheel Material:Vitrified Aluminium Oxide,Grit:60 Grit,Mandrel Size:1/4",Maximum RPM:3,450 RPM,Support Pad Required:No,Thickness:1/4"
|
|
7771674
Grinding Wheel
Arbor Size:1/4",Arbor Thread Size:n/a,Depressed Center:No,Diameter:2",Grinding Material:Carbon, Steel, Wrought Iron, Bronze, & many other Metals,Grinding Wheel Material:Vitrified Aluminium Oxide,Grit:60 Grit,Mandrel Size:1/4",Maximum RPM:3,450 RPM,Support Pad Required:No,Thickness:1/2"
|
|
7771675
Grinding Wheel
Arbor Size:1/4",Arbor Thread Size:n/a,Depressed Center:No,Diameter:2 1/2",Grinding Material:Carbon, Steel, Wrought Iron, Bronze, & many other Metals,Grinding Wheel Material:Vitrified Aluminium Oxide,Grit:60 Grit,Mandrel Size:1/4",Maximum RPM:3,450 RPM,Support Pad Required:No,Thickness:1/4"
|
|
7771676
Grinding Wheel
Arbor Size:1/4",Arbor Thread Size:n/a,Depressed Center:No,Diameter:2 1/2",Grinding Material:Carbon, Steel, Wrought Iron, Bronze, & many other Metals,Grinding Wheel Material:Vitrified Aluminium Oxide,Grit:60 Grit,Mandrel Size:1/4",Maximum RPM:3,450 RPM,Support Pad Required:No,Thickness:1/2"
|
|
7771677
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:4",Disc Material:Resin-fiber,Grit:16 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771678
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:4",Disc Material:Resin-fiber,Grit:24 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771679
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:4",Disc Material:Resin-fiber,Grit:36 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771680
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:4",Disc Material:Resin-fiber,Grit:50 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771681
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:4",Disc Material:Resin-fiber,Grit:80 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771682
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:4",Disc Material:Resin-fiber,Grit:100 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771683
Sanding Discs
Adhesive Type:Spindle nut.,Diameter:4",Disc Material:Resin-fiber,Grit:120 grit,Recommended Surface Type:Many types of rusted or corroded metal
|
|
7771684
Sander Backing Plate / Pad
Construction Material:Flexible Rubber,Diameter:4",Thread Size:M10 x 1.50
|
|
7771685
Sander Backing Plate / Pad
Construction Material:Flexible Rubber,Diameter:4",Thread Size:M10 x 1.25
|
|
7771686
Abrasive Pad / Surface Preparation
Abrasive Grade:General Purpose Grain,Color:Maroon,Construction Material:Tough Fibers Bonded w/ Aluminum Oxide,Dimensions:6" x 9",Optional Liquids For Use:Water & most Solvents,Optional Power Tools For Use:Oscillating Sanders,Recommended Surfaces:Wood or Metal
|
|
7771687
Ground Clamp - Welding
AMP Capacity:400 amps,Clamp Material:Copper Alloy,Length:7"
|
|
7771688
Ground Clamp - Welding
AMP Capacity:300 amps,Clamp Material:Steel,Length:6"
|
|
7771689
Electrode Holder - Welding
AMP Capacity:200 Amps,Electrode Holder Style:Clamp,Material:Heat Resistant Light Weight Nonconductive Material w/ Fibre Glass Jaws
|
|
7771690
Gloves
Cuff Type:Turned Cuff,Glove Cut:Gunn Cut,Glove Material:Sholder Split Leather,Glove Style:Thermo Lined Deluxe Leather Welding Gloves,Hand Size:Large,Lining Type:Yes,Stitch Type:Lock Stitch,Welted Seams:Yes
|
|
7771691
Wrench - Welding Tank
Wrench Size:3/8",Wrench Length:Aprox. 6"
|
|
7771692
Wrench - Welding Tank
Wrench Size:1/4",Wrench Length:Aprox. 6"
|
|
7771693
Soapstone
Length:6",Quantity:144,Shape:Flat
|
|
7771694
Soapstone
Length:6",Quantity:144,Shape:Round
|
|
7771695
Welding Hat
Hat Color:Red Polka Dot,Hat Size:7 1/4,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Hat
|
|
7771696
Welding Hat
Hat Color:Red Polka Dot,Hat Size:7 3/8,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Hat
|
|
7771697
Welding Hat
Hat Color:Red Polka Dot,Hat Size:7 1/2,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Hat
|
|
7771698
Welding Hat
Hat Color:Green Polka Dot,Hat Size:7 1/4,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Hat
|
|
7771699
Welding Hat
Hat Color:Green Polka Dot,Hat Size:7 3/8,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Hat
|
|
7771700
Welding Hat
Hat Color:Green Polka Dot,Hat Size:7 1/2,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Hat
|
|
7771701
Welding Hat
Hat Color:Camouflage,Hat Size:7 1/4,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Hat
|
|
7771702
Welding Hat
Hat Color:Camouflage,Hat Size:7 3/8,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Hat
|
|
7771703
Welding Hat
Hat Color:Camouflage,Hat Size:7 1/2,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Hat
|
|
7771704
Welding Rod Storage Tube
# of Compartments:4 Compartments,Diameter:3",Length:14",Material:Plastic,Removable Divider:Yes
|
|
7771705
Welding Hat
Hat Color:Black,Hat Size:Large,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Beanie
|
|
7771706
Welding Hat
Hat Color:Black,Hat Size:X-Large,Hat Material:Fire Resistant Cotton,Hat Style Name:Welding Beanie
|
|
7771707
Tank Adapter - Welding
Adapter Material:Brass,Application:CGA520 to CGA510 for B Tanks
|
|
7771708
Tank Adapter - Welding
Adapter Material:Brass,Application:CGA 200 to CGA510 for MC Tanks
|
|
7771709
Tank Adapter - Welding
Adapter Material:Brass,Application:CGA510 to CGA520, for B tanks
|
|
7771710
Tank Adapter - Welding
Adapter Material:Brass,Application:CGA580 to CGA320
|
|
7771711
Tank Adapter - Welding
Adapter Material:Brass,Application:CGA510 to CGA300
|
|
7771712
Welding Helmet Lens
Dimensions:2" x 4 1/2",Shade Number & Tint:#9 Light,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771713
Welding Helmet Lens
Dimensions:2" x 4 1/2",Shade Number & Tint:#10 Medium,Magnifying Lens:No,Outer Cover Lens:No
|
|
7771714
Anti-Splatter Chemical - Welding
Application:Mig Welding,Prevents Build Up in Nozzle:Yes,Spray or Gel:Spray
|
|
7771715
Wrench - Grinder Spindle Nut
Application:Used w/ 777-1604 Spindle Nut,Length:6"
|
|
7771716
Electrode Holder - Welding
AMP Capacity:500 Amps,Electrode Holder Style:Clamp,Material:Fiberglass/Copper
|
|
7771717
Gloves
Glove Material:Leather,Glove Style:Deluxe Welding Gloves,Lining Type:Yes
|
|
7771718
Welding Form-A-Shield Gel
Features & Benefits:Water-Soluble, Protects Objects From Heat or Burning While Cutting or Sodering & Can Be Used On Glass, Rubber & Plastic,Size:32 oz
|
|
7771800
Welding Helmet
Lens Size:4-1/2" x 5-1/4",Lens Shade:#10 Filter Plate,Auto Darkening Lens:No,Features & Benefits:Lightweight Design Molded of Thermo-Plastic Resin, Extended Throat Offers Protection From Sparks, Slag & Fumes, Positive Locking Ratchet Headgear, Shade No. 10 Filter Plate & Clear-Cover Lens, Helmet Is Black,Lift Shade Lens:No,Meet Standards:Yes
|
|
7771801
Welding Helmet
Lens Size:2" x 4-1/4",Lens Shade:#10 Filter Plate,Auto Darkening Lens:No,Features & Benefits:Lightweight Design Molded of Thermoplastic Resin, Extended Throat Offers Added Protection From Sparks, Slag & Fumes, Positive Locking Ratchet Headgear, Shade No. 10 Filer Plate & Clear-Cover Lens, Helmet Is Black,Lift Shade Lens:Yes,Meet Standards:Yes
|
|
7771802
Welding Helmet
Lens Size:1.5"x3.8",Lens Shade:Auto Darkening,Auto Darkening Lens:Yes,Features & Benefits:Variable Shade No. 8.5 to 12.5, 1.5" x 3.8" Viewing Area, Ambient Light Sensitivity Adjustment, Low Voltage Indicator, Auto-Off Feature, AAA Alkaline Batteries Can Be Replaced w/o Removing Module, Helmet Is Gold,Lift Shade Lens:No,Meet Standards:Yes,Type:AAA 1.5 V
|
|
7771803
Welding Helmet
Lens Size:4-1/2" x 5-1/4",Lens Shade:#10 Filter Plate,Auto Darkening Lens:No,Features & Benefits:Thinner & Lighter Hood Than Ordinary Welding Helmet, Works As Fixed Front & / or As Lift Front, Positive Locking Ratchet Headgear, Shade No. 10 Filter Plate & Clear Cover Lens,Lift Shade Lens:Yes,Meet Standards:Yes
|
|
7771804
Welding Helmet
Lens Size:2" x 4-1/4",Lens Shade:#10 Filter Plate,Auto Darkening Lens:No,Features & Benefits:Lightweight Design Molded of Thermoplastic Resin, Shade No. 10 Filter Plate & Clear-Cover Lens, Helmet Is Black,Lift Shade Lens:No,Meet Standards:Yes
|
|
7771805
Welding Helmet
Lens Size:1.5" x 3.8",Lens Shade:Auto Darkening,Auto Darkening Lens:Yes,Features & Benefits:Fixed Shade No. 10 Auto-Darkening Module, Auto-Off Feature, Helmet Is Gold,Lift Shade Lens:No,Meet Standards:Yes,Type:AAA 1.5 V
|
|
7771806
Welding Helmet
Lens Size:1.5" x 3.8",Lens Shade:Auto Darkening,Auto Darkening Lens:Yes,Features & Benefits:Variable Shade No. 9 to 12 Auto-Darkening Module, Auto-Off Feature, Helmet Is Gold,Lift Shade Lens:No,Meet Standards:Yes,Type:AAA 1.5 V
|
|
7771807
Welding Helmet
Lens Size:2" x 4-1/4",Lens Shade:#10 Filter Plate,Auto Darkening Lens:No,Features & Benefits:17% Cooler, Lightweight Design Molded of Thermoplastic Resin, Extended Throat Offers Added Protection From Sparks, Slag & Fumes, Positive Locking Ratchet Headgear, Shade No. 10 Gold Filter Plate, Helmet Is Gold,Lift Shade Lens:Yes,Meet Standards:Yes
|
|
7771808
Welding Helmet
Lens Size:4-1/2" x 5-1/4",Lens Shade:#10,Auto Darkening Lens:No,Features & Benefits:Thinner & Lighter Hood Thank Ordinary Welding Helmet, Works As Fixed Front & / or As Lift Front, Postitive Locking Ratchet Headgear, Shade No. 10 Filter Plate & Clear-Cover Lens, Helmet Is Red,Lift Shade Lens:Yes,Meet Standards:Yes
|
|
7771809
Welding Helmet
Lens Size:1-3/8" x 3-7/8",Lens Shade:Shade 10,Auto Darkening Lens:Yes,Features & Benefits:Economical, Shade 10 / 11 w/ Clear State of Shade 4, No Batteries to Change, Auto On Ready-to-Weld, Made In U.S.A., 1 Year Warranty, Helmet Is Black,Lift Shade Lens:Yes,Meet Standards:Yes,Type:Solar-Powered Lithium Battery
|
|
7771810
Welding Helmet
Lens Size:2-3/8" x 3-7/8",Lens Shade:Shade 9-12,Auto Darkening Lens:Yes,Features & Benefits:ADF Auto-Darkening Technology, On / Off Switch w/ Auto-Off Feature, Dark to Clear Delay Adjustment Which Lets User Adjust For Tack Welding or Bright Residual Weld Pool, Helmet Is Black,Lift Shade Lens:Yes,Meet Standards:Yes,Type:AAA Batteries
|
|
7771811
Welding Helmet
Lens Size:4.5" x 5.25",Lens Shade:3, 5, 9, 10 & 11,Auto Darkening Lens:Yes,Features & Benefits:3-In-1 Helmet Features Latest ADF Technology, Offers Ultimate Eye & Face Protection During All Welding Functions & Contains World's Fastest Switching Speed,Lift Shade Lens:No,Meet Standards:Yes,Type:AAA
|
|
7771850
Solder Flux
Style Name:General Purpose Soldering Flux
|
|
7771851
Solder
Style Name:Acid Flux Core Solder,Alloy Ratio:94.5 / 5.5 Tin - Antimony,Flux Included:No,Lead-Free:No,Melting Temperature:590 Degrees F,PSI Rating:94.5 / 5.5 Tin - Antimony = 6000 psi,Recommended Applications:Radiator Repair, General Metal Repair, Not Recommended for Plumbing Repair,Spool Weight:1 lb,Wire Size:1/8"
|
|
7771852
Solder
Style Name:Solid Wire Solder,Alloy Ratio:50 / 50 Tin - Lead,Flux Included:No,Lead-Free:No,Melting Temperature:413 Degrees F,PSI Rating:50 / 50 Tin - Lead = 5500 psi,Recommended Applications:General Purpose Solder, Must Be Used w/ Paste or Liquid Flux,Spool Weight:.5 lb,Wire Size:1/8"
|
|
7771853
Solder
Style Name:Solid Wire Solder,Alloy Ratio:50 / 50 Tin - Lead,Flux Included:No,Lead-Free:No,Melting Temperature:413 Degrees F,PSI Rating:50 / 50 Tin - Lead = 5500 psi,Recommended Applications:General Purpose Solder, Must Be Used w/ Paste or Liquid Flux,Spool Weight:0.25 lb,Wire Size:1/8"
|
|
7771854
Solder
Style Name:Solid Wire Solder,Alloy Ratio:40 / 60 Tin - Lead,Flux Included:No,Lead-Free:No,Melting Temperature:460 Degrees F,PSI Rating:40 / 60 Tin - Lead = 4900 psi,Recommended Applications:General Purpose Solder, Must Be Used w/ Paste or Liquid Flux,Spool Weight:.25 lb,Wire Size:1/8"
|
|
7771855
Solder
Style Name:Solid Wire Solder,Alloy Ratio:30 / 70 Tin - Lead,Flux Included:No,Lead-Free:No,Melting Temperature:496 Degrees F,PSI Rating:30 / 70 Tin - Lead = 4500 psi,Recommended Applications:General Purpose Solder, Must Be Used w/ Paste or Liquid Flux,Spool Weight:.5 lb,Wire Size:1/8"
|
|
7771856
Solder
Style Name:Solid Wire Solder,Alloy Ratio:94.5 / 5.5 Tin - Antimony,Flux Included:No,Lead-Free:No,Melting Temperature:590 Degrees F,PSI Rating:94.5 / 5.5 Tin - Antimony = 6000 psi,Recommended Applications:General Purpose Solder, Must Be Used w/ Paste or Liquid Flux,Spool Weight:1 lb,Wire Size:1/8"
|
|
7771857
Solder
Style Name:Acid Flux Core Solder,Alloy Ratio:40 / 60 Tin - Lead,Flux Included:No,Lead-Free:No,Melting Temperature:460 Degrees F,PSI Rating:40 / 60 Tin - Lead = 4900 psi,Recommended Applications:Radiator Repair, General Metal Repair, Not Recommended for Plumbing Repair,Spool Weight:.25 lb,Wire Size:1/8"
|
|
7771858
Solder
Style Name:Acid Flux Core Solder,Alloy Ratio:30 / 70 Tin - Lead,Flux Included:No,Lead-Free:No,Melting Temperature:496 Degrees F,PSI Rating:30 / 70 Tin - Lead = 4500 psi,Recommended Applications:Radiator Repair, General Metal Repair, Not Recommended for Plumbing Repair,Spool Weight:.5 lb,Wire Size:1/8"
|
|
7771859
Solder
Style Name:Rosin Flux Core Solder,Alloy Ratio:60 / 40 Tin - Lead,Flux Included:No,Lead-Free:No,Melting Temperature:431 Degrees F,PSI Rating:60 / 40 Tin - Lead = 5700 psi,Recommended Applications:General Electrical Repair,Spool Weight:.25 lb,Wire Size:1/16"
|
|
7771860
Solder Flux
Style Name:Liquid Solder Flux
|
|
7771861
Solder
Style Name:Rosin Flux Core Solder,Alloy Ratio:40 / 60 Tin - Lead,Flux Included:No,Lead-Free:No,Melting Temperature:460 Degrees F,PSI Rating:40 / 60 Tin - Lead = 4900 psi,Recommended Applications:General Electrical Repair,Spool Weight:.25 lb,Wire Size:3/32"
|
|
7771862
Solder
Style Name:Rosin Flux Core Solder,Alloy Ratio:30 / 70 Tin - Lead,Flux Included:No,Lead-Free:No,Melting Temperature:431 Degrees F,PSI Rating:30 / 70 Tin - Lead = 4500 psi,Recommended Applications:General Electrical Repair,Spool Weight:.5 lb,Wire Size:3/32"
|
|
7771863
Solder
Style Name:Rosin Flux Core Solder,Alloy Ratio:94.5 / 5.5 Tin - Antimony,Flux Included:No,Lead-Free:No,Melting Temperature:590 Degrees F,PSI Rating:94.5 / 5.5 Tin - Antimony = 6000 psi,Recommended Applications:General Electrical Repair,Spool Weight:1 lb,Wire Size:1/8"
|
|
7771864
Solder
Style Name:Lead Free Solid Wire,Alloy Ratio:94.5 / 5.5 Tin - Antimony,Flux Included:No,Lead-Free:Yes,Melting Temperature:590 Degrees F,PSI Rating:94.5 / 5.5 Tin - Antimony = 6000 psi,Recommended Applications:Lead Free Solder Recommended for Plumbing Use,Spool Weight:1 lb,Wire Size:1/8"
|
|
7771865
Solder
Style Name:Lead Free Solid Wire,Alloy Ratio:94.5 / 5.5 Tin - Antimony,Flux Included:No,Lead-Free:Yes,Melting Temperature:590 Degrees F,PSI Rating:94.5 / 5.5 Tin - Antimony = 6000 psi,Recommended Applications:Lead Free Solder Recommended for Plumbing Use,Spool Weight:.5 lb,Wire Size:1/8"
|
|
7771866
Solder
Style Name:Lead Free Solid Wire,Alloy Ratio:94.5 / 5.5 Tin - Antimony,Flux Included:No,Lead-Free:Yes,Melting Temperature:590 Degrees F,PSI Rating:94.5 / 5.5 Tin - Antimony = 6000 psi,Recommended Applications:Lead Free Solder Recommended for Plumbing Use,Spool Weight:.25 lb,Wire Size:1/8"
|
|
7771867
Solder Flux
Style Name:Aluminum Flux
|
|
7771868
Solder
Style Name:Silver Solder Kit,Flux Included:Yes,Lead-Free:Yes,Length:36",Melting Temperature:450 Degrees F,PSI Rating:8000 psi,Recommended Applications:Used to Bond Brass, Copper, Nickel, Stainless Steel, & Chrome Plate,Spool Weight:.75 oz,Wire Size:1/16"
|
|
7771869
Solder Flux
Style Name:Brazing Flux
|
|
7771870
Solder
Style Name:Silver Solder Kit,Flux Included:Yes,Lead-Free:Yes,Length:21",Melting Temperature:450 Degrees F,PSI Rating:8000 psi,Recommended Applications:Used to Bond Brass, Copper, Nickel, Stainless Steel, & Chrome Plate,Spool Weight:.60 oz,Wire Size:1/16"
|
|
7771871
Solder Flux
Style Name:General Purpose Soldering Flux Liquid
|
|
7771872
Solder Flux
Style Name:General Purpose Soldering Flux Liquid
|
|
7771900
Cut-Off Wheel
Diameter:4.5" Dia,Arbor Shape:Round,Thickness:3/32",Arbor Size:7/8" Arbor,Cuts What Material:Steel,Maximum RPM:13,300 RPM Max
|
|
7771901
Jacket - Welding
Collar Type:Stand Up Collar,Front & Cuff Snaps:Yes,Government Spec. #:DOC-ff-77-75,Jacket Length:30",Jacket Material:Flame Retardant Sateen,Jacket Size:XL
|
|
7771902
Jacket - Welding
Collar Type:Stand Up Collar,Front & Cuff Snaps:Yes,Government Spec. #:DOC-ff-77-75,Jacket Length:30",Jacket Material:Flame Retardant Sateen,Jacket Size:XXL
|
|
7771903
Jacket - Welding
Collar Type:Stand Up Collar,Front & Cuff Snaps:Yes,Government Spec. #:DOC-ff-77-75,Jacket Length:30",Jacket Material:Flame Retardant Sateen,Jacket Size:XXXL
|
|
7771904
Apron - Welding
Apron Material:Flame Retardant Sateen,Apron Size:XL,Government Spec. #:DOC ff-77-75
|
|
7771905
Apron - Welding
Apron Material:Flame Retardant Sateen,Apron Size:XXL,Government Spec. #:DOC ff-77-75
|
|
7771906
Apron - Welding
Apron Material:Flame Retardant Sateen,Apron Size:XXXL,Government Spec. #:DOC ff-77-75
|
|
7771907
Bib - Welding
Bib Material:Flame Retardant Sateen,Bib Size:XL
|
|
7771908
Bib - Welding
Bib Material:Flame Retardant Sateen,Bib Size:XXL
|
|
7771909
Bib - Welding
Bib Material:Flame Retardant Sateen,Bib Size:XXXL
|
|
7771911
Torch Lighter Flint
Additional Contents:Replacement Flints,For BK Striker #:Fits Welding # 777-1418 w/ SAE Threads
|
|
7771912
Sanding Discs
Adhesive Type:Spindle nut on grinder,Diameter:4.5",Disc Material:Cloth backed resin,Grit:16 grit,Recommended Surface Type:Metal, plastic, wood
|
|
7771913
Sanding Discs
Adhesive Type:Spindle nut on grinder,Diameter:4.5",Disc Material:Cloth backed resin,Grit:24 grit,Recommended Surface Type:Metal, plastic, wood
|
|
7771914
Sanding Discs
Adhesive Type:Spindle nut on grinder,Diameter:4.5",Disc Material:Cloth backed resin,Grit:36 grit,Recommended Surface Type:Metal, plastic, wood
|
|
7771915
Sanding Discs
Adhesive Type:Spindle nut on grinder,Diameter:4.5",Disc Material:Cloth backed resin,Grit:50 grit,Recommended Surface Type:Metal, plastic, wood
|
|
7771916
Sanding Discs
Adhesive Type:Spindle nut on grinder,Diameter:4.5",Disc Material:Cloth backed resin,Grit:80 grit,Recommended Surface Type:Metal, plastic, wood
|
|
7771917
Sanding Discs
Adhesive Type:Spindle nut on grinder,Diameter:4.5",Disc Material:Cloth backed resin,Grit:100 grit,Recommended Surface Type:Metal, plastic, wood
|
|
7771918
Sanding Discs
Adhesive Type:Spindle nut on grinder,Diameter:4.5",Disc Material:Cloth backed resin,Grit:120 grit,Recommended Surface Type:Metal, plastic, wood
|
|
FAQ
|
Tech
|
Links
© 2007 D&M Auto Parts Corporation
|
